( Raw. Beadblast & Stonewash Finish Variants )
519A Nichia – 4000K Color
Includes A 18350 Lithium Battery & 1A Quick Charger Too!
The Reylight Triple-LED Custom Flashlight
A pocket-sized powerhouse designed for ultimate versatility. the Reylight features a premium triple-Nichia 219B LED setup paired with a Carclo TIR optic. This combination delivers up to 2.000 lumens of beautifully tinted. ultra-wide flood light—perfect for short-range and up-close illumination.
Compact & Modular Design
– Pocket to Full-Sized: Ships in an ultra-compact 18350 configuration (82 mm / 3.23 in. 154g / 5.43 oz with battery).
– Tough & Lightweight: Precision machined with a 25 mm / 0.98 in head diameter and a lightweight 128g (4.51 oz) bare weight.
– Zero-Drain Lockout: Features a true mechanical tail switch that consumes zero standby energy. making physical lockouts unnecessary.
Performance & Power
-
Max Output: Blasts up to 2.000 lumens on Turbo using high-drain cells. gracefully tapering down after a 60-second safety timer to manage heat.
-
Low-Voltage Protection: Built-in safety driver automatically shuts the light off at 2.9V to protect your batteries.
-
Current Draw (Measured at Tail): Moon (0.08A) | Low (0.19A) | Medium (1.0A) | Turbo (4.6A).
Dual-Layer User Interface
The mechanical switch uses simple clicks for power and intuitive half-clicks to navigate modes. Includes Mode Memory(saves your last mode after 1 second of use) and zero noticeable PWM flicker.
Triple Nichia 519a-4000K LED
Group1: (Moonlight)-2%-20%-100% ( Default)
Group2: (ML)-10%-40%-100%
Group3: (ML)-2%-10%-50%
Group4: (ML)-50%-100%-strobe-SOS
Programming guide
- ToEnter Configuration Mode:
-From ON. half-click/tap the tail switch 8+ times until it starts to flash.
(When the configuration mode is entered. the light will start to blink once. then a quick flash. blink twice. then a quick flash. blink three times. then a quick flash. blink four times. then a quick flash. blink five times. then a quick flash. This sequence continues twice if a selection is not chosen)
*The number of blinks indicates the configuration option number to be changed.
* Half-click/tap the tail switch during any quick flashes following the blinks to select the configuration option.
-Here are the configuration options:
- Mode group selection
(After entering this menu. you can see it blink 4 times. The number of blinks indicates the number of mode groups)
The 1st blink ——— Group1: (Moonlight)-2%-20%-100%
The 2nd blink ——– Group2: (Moonlight)-10%-40%-100%
The 3rd blink ——– Group3: (Moonlight)-2%-10%-50%
The 4th blink ——– Group4: (Moonlight)-50%-100%-strobe-SOS
*Half-click/tap the tail switch during any blinks to select the mode group.
*After selecting the mode group. you can half-click/tap to select the brightness mode.
- Memory mode on-off toggle (default off)
To turn memory mode on. half-click/tap the tail switch during the quick flash after the second blink.
*To turn off the memory mode. reenter the configuration mode and repeat the instruction above.
- Moonlight mode off-on toggle (default on)
To turn the moonlight off. half-click/tap the tail switch during the quick flash after the third blink.
*Repeat to turn the moonlight on.
- Mode order toggle (default LMH)
To change the mode order from Low Medium High to High Medium Low. half-click/tap the tail switch during the quick flash after the fourth blink.
*Repeat to reverse the order.
For example. the default mode order of group 1 is (Moonlight)-2%-20%-100%. if you change the mode group to HML. the mode ORDER of group 1 will be (Moonlight)-100%-20%-2%
- Factory reset
Half-click/tap the tail switch during the quick flash after the fifth blink to reset all options to their original states.
Please check the programming and .
Reviews
There are no reviews yet.